Research Article
The Parametric survey on the nano particles performance for treating of industrial wastewater
Abdolrahim Zarei and Farshad Farahbod*
Department of Chemical Engineering, Sirjan Branch, Islamic Azad University, Sirjan, Iran
- *Corresponding Author:
- Farshad Farahbod
Department of Chemical Engineering
Islamic Azad University
Firoozabad, Iran
Tel: +98 47352110
E-mail: mf_fche@iauf.ac.ir
Received Date: December 26, 2016; Accepted Date: January 02, 2017; Published Date: January 12, 2017
Citation: Zarei A, Farahbod F (2017) The Parametric Survey on the Nano Particles Performance for Treating of Industrial Wastewater. Oil Gas Res 3:129. doi: 10.4172/2472-0518.1000129
Copyright: © 2017 Zarei A, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
The techniques of wastewater treatment have been considered, recently. The performance of usage of nano ferric oxide and aluminum oxide as coagulant is evaluated in this work, experimentally. The experiments were conducted to measure the important parameters in quality of treatment by addition of four different amounts of nano two metal oxides 1, 1.5, 2 and 2.5 gr. The value of pH, color, color/color0, zeta potential, slug volume index, total dissolved solids conductivity, turbidity, ammonia, sulfide, heavy metals, phenol, oil and grease is investigated. The results show the better performance of nano ferric oxide in coagulation and flocculation by lower amount of zeta potential, ammonia, phenol and sulfide and oil, grease elimination than aluminum oxide. However the value of slug volume index in treated wastewater by nano ferric oxide is higher than that is obtained with nano aluminum oxide
