Our Group organises 3000+ Global Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ 黑料网 Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.
Extremely foldable and highly transparent nanofiber-based electrodes for liquid crystal smart devices
20th International Conference on Advanced Energy Materials and Research
In Chul Kim, Tae-Hyung Kim, Seung Hee Lee and Byoung-Suhk Kim
Department of Organic Materials & Fiber Engineering, Chonbuk National University, Republic of KoreaDepartment of BIN Convergence Technology, Chonbuk National University, Republic of KoreaDepartment of Polymer-Nano Science and Technology, Chonbuk National University, Republic of Korea
In recent years, flexible transparent electrodes have attracted great attention in many wearable optoelectronic devices,
such as touch screens, organic light-emitting diodes (OLEDs), solar cells, electronic skins, etc. The basic requirements for
foldable transparent electrodes are optical transparency, low electrical resistance, and high level of extreme bending toughness
without significant decrease in the electrical performance. Generally, resistivity and optical transmittance follow opposite
trends. It is therefore important to achieve the optimized balance between the electrical resistivity and optical transmittance
in order to get a highly conductive transparent electrode. Traditionally, commercial indium-tin oxide (ITO) electrodes have
been widely used in transparent conducting optoelectronic devices. However, there are still some disadvantages of ITO
electrodes in flexible electronic applications, such as the scarcity of indium, the high cost of manufacturing processing, and
their mechanical brittleness, which prompt the research for the alternative materials to replace the ITO electrodes for next
generation optoelectronic flexible devices. In this work, the nylon 6 nanofiber-reinforced cellulose acetate (NF-r-CA) film as a
fiber-based transparent substrate was used to develop the highly transparent electrodes with excellent durable and extremely
foldable properties. The NF45-r-CA electrodes prepared using AgNWs concentration of 0.025 wt% and electrospinning time
of 45 min were highly transparent (~ 90%), mechanically robust (59.6 MPa) and lower sheet resistance (20~30 惟 sq-1) even
under extreme bending radius of 1 mm for 10,000 cycles. In addition, the NF-r-CA based PDLC (Polymer Dispersed Liquid
Crystal) film could retain the working stability even after bending test of 500 cycles at an extreme bending radius of 1.5 mm,
whereas ITO PDLC film was stopped working after bending test of merely 50 cycles. This result demonstrates the excellent
foldable stability of NF-r-CA PDLC films at an extreme bending radius of 1.5 mm.